[NotiAMCA] charla Carrica cancelada

[Mario Storti]

Axel Larreteguy (UADE) nos comunica lo siguiente:

================================================================
Por razones que son de público conocimiento, relacionadas con el virus
de la Influenza A, se suspenden todas las actividades
extracurriculares de UADE, entre ellas la charla anunciada del
Dr. Carrica del jueves 16 de este mes.

El Dr. Carrica estará de todas maneras en Argentina a partir del 15
(en el teléfono 011 4825-1074), por si los interesados en el tema de
la beca ofrecida quieren comunicarse con él.


-----Mensaje original-----
De: Mario Storti [mailto:mario.storti en gmail.com]
Enviado el: Miércoles, 01 de Julio de 2009 04:46 PM
Para: Larreteguy Axel Eduardo
Asunto: Re: Para difundir en NotiAMCA: charla y ofrecimiento de beca para USA

Hecho!! Abrazo, Mario

On Wed, Jul 1, 2009 at 4:31 PM, Larreteguy Axel Eduardo<LAR en uade.edu.ar> wrote:
> Mario
>
>  Por favor difundir en la comunidad.
>
> Gracias
>
> Axel
>
>
> Dr. Axel Eduardo Larreteguy
> Director
> Instituto de Tecnología
> Universidad Argentina de la Empresa - UADE
>
>
>
>
> Dr. Axel Eduardo Larreteguy
> Director
> Instituto de Tecnología
> Universidad Argentina de la Empresa - UADE
>
>
>
> ----------------------------------------------------------------------
> ---------------------------------------------------------
>
> Van dos noticias de interés para difundir: 1) charla y 2) beca de
> doctorado en USA.
>
> 1) El Instituto de Tecnología de UADE invita a la charla que dará el Dr.
> Pablo M. Carrica (IIHR-Hydroscience and Engineering, The University of
> Iowa,
> USA) titulada "Toward Large-Scale Computations of Ship Motions with
> Dynamic Overset Curvilinear Grids". La charla será el jueves 16 de
> Julio, de 17 a 18hs, en el Aula 5, 2do piso, edificio Chile 1,
> Universidad Argentina de la Empresa, Lima 717, Ciudad Autónoma de
> Buenos Aires. Por cualquier consulta, contactar a María Gabriela Alonso, mariagalonso en uade.edu.ar, 011 4000 7423.
>
> Abstract: I'll present the results of an ongoing effort to improve the
> serial and parallel performance of the overset curvilinear grids
> based, single-phase level set code CFDShip-Iowa version 4, as well as
> the ability to handle large-scale problems. In CFDShip-Iowa version 4
> large-amplitude motions are handled using dynamic overset grids. The
> connectivity between the grids is handled using Suggar, an overset
> interpolation code with general motions and body hierarchy
> capabilities. CFDShip-Iowa calls Suggar every nonlinear iteration (in
> implicit motions mode) or every time step (in explicit motions mode).
> Since CFDShip-Iowa scales better than Suggar, increasing the number of
> grid points significantly increases the fraction of time used by Suggar. Three actions have been taken to mitigate this problem.
> First, a preassembly step was added in Suggar to take advantage of
> grids that belong to the same dynamic group and therefore will not
> move relatively to each other during the computation. Second, the use
> of named pipes to communicate and synchronize Suggar with CFDShip-Iowa
> was replaced by MPI code in which Suggar runs in a set of processors
> separate from those used by CFDShip-Iowa. Finally, a lagged mode was
> added in which CFDShip-Iowa estimates the motions of the different
> objects for the next time that the connectivity is needed. In this
> mode Suggar can run simultaneously with CFDShip-Iowa and
> synchronization is only needed when the connectivity is used by the
> flow solver. In explicit motions mode the method has been tested and
> results are very satisfactory as well. Computations are presented for
> the surface combatant model DTMB 5415 in straight ahead condition, 20
> degrees pure drift, forward speed diffraction and pitch and heave, these last two cases in waves.
>
> 2) El Dr. Carrica ofrece una beca de doctorado en el IIHR en el tema
>
> "Two-phase flow modeling and code implementation". Los interesados
> pueden escribirle a pcarrica en engineering.uiowa.edu y/o acercarse el
> día de la charla para discutir con él los detalles.
>
>
>
> Si no es necesario no imprima este correo. Todos somos responsables
> por el cuidado del medio ambiente.
> Este es un mensaje confidencial. El mismo contiene informacion
> reservada que no puede ser difundida. Si Usted ha recibido este e-mail
> por error, por favor avisenos inmediatamente via correo electronico y
> tenga la amabilidad de eliminarlo de su sistema. No debera copiar el
> mensaje ni divulgar su contenido. Muchas gracias This message is
> confidential. It contains information that is privileged and legally
> exempt from disclosure. If you have received this e-mail by mistake,
> please let us know immediately by e-mail and delete it from your
> system, you should also not copy the message nor disclose its contents
> to anyone. Thank you
>
>
>
>
> Si no es necesario no imprima este correo. Todos somos responsables
> por el cuidado del medio ambiente.
> Este es un mensaje confidencial. El mismo contiene informacion
> reservada que no puede ser difundida. Si Usted ha recibido este e-mail
> por error, por favor avisenos inmediatamente via correo electronico y
> tenga la amabilidad de eliminarlo de su sistema. No debera copiar el
> mensaje ni divulgar su contenido. Muchas gracias This message is
> confidential. It contains information that is privileged and legally
> exempt from disclosure. If you have received this e-mail by mistake,
> please let us know immediately by e-mail and delete it from your
> system, you should also not copy the message nor disclose its contents
> to anyone. Thank you
>
>
>



--
-------------------------
Mario Alberto Storti
Centro Internacional de Metodos Computacionales
 en Ingenieria - CIMEC (INTEC/CONICET-UNL) INTEC, Guemes 3450 - 3000
Santa Fe, Argentina
Tel/Fax: +54-342-4511594, cel: +54-342-156144983
e-mail: mario.storti en gmail.com
http://www.cimec.org.ar/mstorti http://www.cimec.org.ar
-------------------------



Si no es necesario no imprima este correo. Todos somos responsables
por el cuidado del medio ambiente.
Este es un mensaje confidencial. El mismo contiene informacion
reservada que no puede ser difundida. Si Usted ha recibido este e-mail
por error, por favor avisenos inmediatamente via correo electronico y
tenga la amabilidad de eliminarlo de su sistema. No debera copiar el
mensaje ni divulgar su contenido. Muchas gracias
This message is confidential. It contains information that is
privileged and legally exempt from disclosure. If you have received
this e-mail by mistake, please let us know immediately by e-mail and
delete it from your system, you should also not copy the message nor
disclose its contents to anyone. Thank you





-- 
-------------------------
Mario Alberto Storti
Centro Internacional de Metodos Computacionales
  en Ingenieria - CIMEC (INTEC/CONICET-UNL)
INTEC, Guemes 3450 - 3000 Santa Fe, Argentina
Tel/Fax: +54-342-4511594, cel: +54-342-156144983
e-mail: mario.storti en gmail.com
http://www.cimec.org.ar/mstorti http://www.cimec.org.ar
-------------------------